

| Subject: | Re: Gowesty reduction starter user input please |
| From: | Michael McSwain |
| Date: | Thu, 2 Feb 2017 17:06:46 -0500 |
I got the adapter and an off brand gear reduction starter and so far so good. It's probably been in for 6 months or so. On Fri, Jan 27, 2017 at 12:30 PM, Neil N <musomuso@gmail.com> wrote: > Thanks the tips and input Richard. > > I have a round and flat file. My only real concern doing this > repair "in the field" is snapping the starter mount stud at clutch housing; > AFAIK, it needs to be removed for installation of starter adaptor plate. > > Neil. > > On Thursday, January 26, 2017, Richard Koerner <rjkinpb@sbcglobal.net> > wrote: > > Neil, Karl's adapter and a Bosch starter work great; that's what I used to > > replace the starter on my 2.2 Subie engine conversion (with the KEP > > plate). One thing you will need to do to the starter however is file a > > "notch" in the aluminum flange of the starter to provide clearance for > one > > of the mounting bolts. I used a 1/2" diameter round file to accomplish > > this; only took 10 minutes of filing. The size of this "notch" is about > > the size of a nickel. So if you are on the road a stop at Home Depot or > > equivalent to buy a file might be necessary. > > > > Just don't want you to get halfway into the job to discover this... > > > > Somewhere there is a photo of this "notch"....I can't seem to find it. > > Maybe someone else can send a link. > > > > Rich > > > > San Diego > > > > > > ------------------------------ > > *From:* Neil N <musomuso@GMAIL.COM > > <javascript:_e(%7B%7D,'cvml','musomuso@GMAIL.COM');>> > > *To:* vanagon@GERRY.VANAGON.COM > > <javascript:_e(%7B%7D,'cvml','vanagon@GERRY.VANAGON.COM');> > > *Sent:* Thursday, January 26, 2017 12:26 PM > > *Subject:* Re: Gowesty reduction starter user input please > > > > > > I was, and may still be leaning towards your adaptor plus TDI starter > > setup, but am Leary of trying to remove the starter stud at clutch > housing > > while on this road trip; I'm not equipped to deal with a snapped stud.... > > If I'm not misunderstanding the instructions I see on vancafe a web > > > > > -- > Neil n > > Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca> > > 1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy> > > 1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/> > > Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay> > -- m.
Have something to add on this topic today? Revive this thread in the forum »