The copper foil tape, after trimming to proper width, looks to be the
ideal material to fix/replace damaged foil at the main connector.  Is
this where you have used it and does it work well?

www.findtape.com/JVCC-CFL-5CA-Copper-Foil-
Tape/p329/vid=2113&bc=F&c=US&gclid=CKql1seBqNICFdq6wAodpkkFEw

On Thu, 23 Feb 2017 23:37:34 -0600, KI4TLF <ki4tlf@GMAIL.COM> wrote:

>I've used
>
>http://www.all-spec.com/Catalog/Soldering-Rework/PCB-Board-Assembly-
and-Repair/Circuit-Board-Assembly-Repair-Kits/115-5205-10123
>
>and
>
>http://www.findtape.com/JVCC-CFL-5CA-Copper-Foil-Tape/p329/?
vid=2113&bc=F&c=US&gclid=CKql1seBqNICFdq6wAodpkkFEw
>
>Depending on what type of repair I needed to do.  I've also used the
rear window defroster, wire type, repair kits for short breaks or cracks
in the strips.
>
>GregM
>