here's the list of things I did once the dash board was out... I did as
much as I can because I know that I won't do it again soon...

- replace the blower motor

- replace the resistor

- lube wipers motor and arms

- install new windshield nozzles (2 holes style)

- add one extra ground tree

- remove all existing ground trees, clean them and clean the ground
connectors too

- replace the clutch pedal too - I had a friend as helper.

- replace the climate control bulbs

- replace the cigarette lighter with twin USB ports

- replace the brake booster seal

- replace all the flaps on the blower motor box foam using this tape -
http://www.homedepot.com/p/Armacell-2-in-x-30-ft-R-1-Foam-Insulation-Tape-TAP18230/100539553

- sound deadening the front nose wall using this tape -
http://www.homedepot.com/p/USEAL-USA-4-in-x-66-7-ft-NonSkid-Roof-Tape-USEAL-8872NF4/204194240?MERCH=REC-_-rv_nav_plp_rr-_-NA-_-204194240-_-N

- repair all the broken plastic air hoses using this tape -
http://www.homedepot.com/p/Nashua-Tape-1-89-in-x-50-yd-322-Multi-Purpose-HVAC-Foil-Tape-1207792/100030120

dan