Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: propane copper tubing 3/8" type K , rigid or soft
From:Frank Condelli
Date:Thu, 30 Mar 2017 10:11:08 -0500

No problem what-so-ever with clearance.  These vans were made to have a Propane tank on either side depending on the country they were delivered to.  I have personally installed many tanks, including the one on my personal ’87 Westy on the right side.  No problem,  two of the studs are there and you need to add two more, there are two welded on nuts covered with sealant there to accept the studs or bolts, your choice, in the proper location for the tank.

> On Mar 30, 2017, at 9:26 AM, Automatic digest processor <LISTSERV@GERRY.VANAGON.COM> wrote:
> 
> ORR, you are probably correct, but is there sufficient clearance there?  I
> know that some people install a second tank there (or I should say I have
> heard that some people do, not that I know that they do).  But I have also
> heard that one problem with that installation is clearance.

      Please note that I will be away from my business travelling from December 01 until April 30, 2017.  Parts orders will be processed although not as quickly as usual.  I will always be available for contact by E-mail.  If you phone your call will be addressed by Steven and he will either call you back or advise you to contact me directly by E-mail.  

Cheers, 
   
Frank Condelli
Almonte, Ontario, Canada
'87 VW Westy, '00 Kawasaki 250 Sherpa, "98 Ducati 750 Monster & Lionel Trains (Collection for sale <http://frankcondelli.com/trainsal.htm>)
Frank Condelli & Associates <http://www.frankcondelli.com/> - Vanagon/Vanagon Westfalia Service in the Ottawa Valley
BusFusion <http://www.busfusion.com/> a VW Camper camping event, Almonte, ON, June 08 ~ 11, 2017