Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Plastic part for the louvered rear vents
From:Jim Felder
Date:Thu, 6 Apr 2017 23:51:38 +0000
Yes the two are different widths on the top surface which doesn't matter as
that is covered by the intake. What matters is will the snap-in portion on
the backs fit into the square hole in the vent metalwork, and it appears
that it will.

Jim

On Thu, Apr 6, 2017 at 6:48 PM Dan N <dn92610@gmail.com> wrote:

> one of these may work...
>
>
> http://www.oreillyauto.com/site/c/search/Interior+Trim+Clips/N0279/C0329.oap?page=4&results=20&sortBy=1
>
> may be this
>
> http://www.oreillyauto.com/site/c/detail/DORN/461240BP/N0279.oap?pt=N0279&ppt=C0329
>