The canister is located on the passenger side rear wheel well. The
purge valve is located near the canister.

On 6/3/17, John Rodgers <jrodgers113@gmail.com> wrote:
> Where is that cannister and valve located. I can see it in the Bentley asca
> part of the fuel tank venting system But the hose coming from it goes to a
> port on top of the engine air filter housing. And it has a cap on it like
> it was made to go there, effectively blocking anything going in.
>
> John
>
> On Jun 3, 2017 22:03, "Neil N" <musomuso@gmail.com> wrote:
>
> I believe that hose should connect to the charcoal (EVAP) canister purge
> valve.
>
> On 6/3/17, John Rodgers <jrodgers113@gmail.com> wrote:
>
>> Rummaging around on my engine today and found a hard plastic tube that
>> seemingly serves no purpose. Can't find it in the Bentley anywhere. It is
>> attached to the hose between the AFM and the Idle Stabilize. Goes forward
>> around the front top the engine then through a hole in the fire wall
> ........
>
>>
>> Any suggestions as to what this is?
>>
>> Thanks ,
>>
>> John
>>
>
>
> --
> Neil n
>
> Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>
>
> 1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>
>
> 1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>
>
> Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>
>

--
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>