Relay worked like a charm.  I now have all three speeds with the A/C blower.  Thanks Ken!

Sent from my iPhone

> On Jun 12, 2017, at 2:17 PM, kenneth wilford <kenwilfy@GMAIL.COM> wrote:
> 
> Sounds good.
> Ken Wilford at vanagain.com
> 
> On Jun 12, 2017 5:06 PM, "rick Duvernay" <richard.duvernay@sbcglobal.net>
> wrote:
> 
>> Okay.  I ordered the relay and will post result. Thanks!
>> 
>> Sent from my iPhone
>> 
>>> On Jun 12, 2017, at 2:48 PM, kenneth wilford <kenwilfy@GMAIL.COM> wrote:
>>> 
>>> There is no other relay like this one on the van.  It tries to do about
>>> three or four different things and is usually the root of fan weirdness
>> on
>>> the 86-91 Vanagon AC system.  Here is a link to it in our store if you
>> want
>>> to buy a new one.
>>> 
>>> https://www.vanagain.com/shop/ac-fan-relay/
>>> 
>>> Ken
>>> 
>>> On Mon, Jun 12, 2017 at 2:32 PM, rick Duvernay <
>>> richard.duvernay@sbcglobal.net> wrote:
>>> 
>>>> Thanks Ken!  Is there another similar relay in the van I can swap out to
>>>> test and would a replacement be available through you or another vendor?
>>>> 
>>>> Sent from my iPhone
>>>> 
>>>> On Jun 12, 2017, at 1:25 PM, kenneth wilford <kenwilfy@gmail.com>
>> wrote:
>>>> 
>>>> Actually many times this is caused by a relay in the rear air
>> conditioning
>>>> system.  It is the tallest of the three relays that are over in the left
>>>> rear pillar that has the number 13 on the top.
>>>> 
>>>> Ken Wilford at vanagain.com
>>>> 
>>>> On Jun 12, 2017 2:19 PM, "rick Duvernay" <richard.duvernay@sbcglobal.
>> net>
>>>> wrote:
>>>> 
>>>>> Folks-
>>>>> 
>>>>> I have an 87 gl camper. The rear ac blower motor only operates on high
>>>>> speed.  I changed out the front switch on the dash.  It made no
>> difference.
>>>>> Is there a resistor in back near the blower motor that I should change?
>>>>> Six months ago I removed the dash and changed out the front blower
>> motor
>>>>> and resistor (after cleaning out the mouse nest).  I saved the old
>> resister
>>>>> from the front.  Can I use that?  I have a Bentley, but I never
>> learned how
>>>>> to read wiring diagrams.  Any suggestions would be appreciated.
>>>>> 
>>>>> Rick
>>>>> 
>>>>> Sent from my iPhone
>>>> 
>>>> 
>> 
>>