Glad to hear it!

On Fri, Jun 16, 2017, 7:48 PM rick Duvernay <richard.duvernay@sbcglobal.net>
wrote:

> Relay worked like a charm.  I now have all three speeds with the A/C
> blower.  Thanks Ken!
>
> Sent from my iPhone
>
> > On Jun 12, 2017, at 2:17 PM, kenneth wilford <kenwilfy@GMAIL.COM> wrote:
> >
> > Sounds good.
> > Ken Wilford at vanagain.com
> >
> > On Jun 12, 2017 5:06 PM, "rick Duvernay" <richard.duvernay@sbcglobal.net
> >
> > wrote:
> >
> >> Okay.  I ordered the relay and will post result. Thanks!
> >>
> >> Sent from my iPhone
> >>
> >>> On Jun 12, 2017, at 2:48 PM, kenneth wilford <kenwilfy@GMAIL.COM>
> wrote:
> >>>
> >>> There is no other relay like this one on the van.  It tries to do about
> >>> three or four different things and is usually the root of fan weirdness
> >> on
> >>> the 86-91 Vanagon AC system.  Here is a link to it in our store if you
> >> want
> >>> to buy a new one.
> >>>
> >>> https://www.vanagain.com/shop/ac-fan-relay/
> >>>
> >>> Ken
> >>>
> >>> On Mon, Jun 12, 2017 at 2:32 PM, rick Duvernay <
> >>> richard.duvernay@sbcglobal.net> wrote:
> >>>
> >>>> Thanks Ken!  Is there another similar relay in the van I can swap out
> to
> >>>> test and would a replacement be available through you or another
> vendor?
> >>>>
> >>>> Sent from my iPhone
> >>>>
> >>>> On Jun 12, 2017, at 1:25 PM, kenneth wilford <kenwilfy@gmail.com>
> >> wrote:
> >>>>
> >>>> Actually many times this is caused by a relay in the rear air
> >> conditioning
> >>>> system.  It is the tallest of the three relays that are over in the
> left
> >>>> rear pillar that has the number 13 on the top.
> >>>>
> >>>> Ken Wilford at vanagain.com
> >>>>
> >>>> On Jun 12, 2017 2:19 PM, "rick Duvernay" <richard.duvernay@sbcglobal.
> >> net>
> >>>> wrote:
> >>>>
> >>>>> Folks-
> >>>>>
> >>>>> I have an 87 gl camper. The rear ac blower motor only operates on
> high
> >>>>> speed.  I changed out the front switch on the dash.  It made no
> >> difference.
> >>>>> Is there a resistor in back near the blower motor that I should
> change?
> >>>>> Six months ago I removed the dash and changed out the front blower
> >> motor
> >>>>> and resistor (after cleaning out the mouse nest).  I saved the old
> >> resister
> >>>>> from the front.  Can I use that?  I have a Bentley, but I never
> >> learned how
> >>>>> to read wiring diagrams.  Any suggestions would be appreciated.
> >>>>>
> >>>>> Rick
> >>>>>
> >>>>> Sent from my iPhone
> >>>>
> >>>>
> >>
> >>
>
>