

| Subject: | Re: Any repair recommendations while dashboard is removed? |
| From: | John Rodgers |
| Date: | Fri, 30 Jun 2017 11:36:25 -0500 |
Tie-wraps and side-cutters go together. There are good reasons to use them on the heater box. 1) long lasting 2) easy to install 3) easy to remove with a snip of the sidecutter. 4) Available in any hardware store 5) Can be obtained 7 days a week 6) Cost almost nothing each, especially if taken from a bulk assortment. Nothing quite like a homemade fix for a Vanagon owner! On Jun 30, 2017 11:16, "Marc Perdue" <mcperdue@gmail.com> wrote: > It's time like this when there were Like buttons for the list! :) > Marc > > On Fri, Jun 30, 2017 at 12:05 PM, Jim Felder <jim.felder@gmail.com> wrote: > > > Procrastination is a skill I appreciate more with each passing year. > > > > Jim > > > > On Fri, Jun 30, 2017 at 10:55 AM Stephen Grisanti <bike2vcu@yahoo.com> > > wrote: > > > > > Some of us are so good at procrastination that doing stuff under the > dash > > > is not an issue. > > > > > > Stephen > > > > > > Mobile > > > > > > > On Jun 30, 2017, at 11:27 AM, Jim Felder <jim.felder@GMAIL.COM> > wrote: > > > > > > > > Small black tie wraps have worked great on both vans I've had where > the > > > > heater core had to be replace. Rattling? Silly Marc : ) > > > > > > > > Jim > > > > > > > >> On Fri, Jun 30, 2017 at 9:22 AM Marc Perdue <mcperdue@gmail.com> > > wrote: > > > >> > > > >> Tie-wraps?!? Silly John! I went with the metal clips that you can > get > > > >> specifically for the purpose; I figured they'd last long enough and > > the > > > box > > > >> wouldn't rattle or anything like that. > > > >> > > > >> Marc > > > >> > > > >> On Fri, Jun 30, 2017 at 12:46 AM, John Rodgers < > jrodgers113@gmail.com > > > > > > >> wrote: > > > >> > > > >>> I'd suggest removing the heater box and relining the shuttere that > > > direct > > > >>> air flow. Also remove heater box, split it, then put it back > together > > > >> with > > > >>> tie-wraps. This will save a lot of frusreation later when the front > > > fresh > > > >>> air fan goes out! And it will eventually! > > > >>> > > > >>> John > > > >>> > > > >>> On Jun 29, 2017 12:15, "J.C." <dougm+sfbayrangers@kzsu. > stanford.edu> > > > >>> wrote: > > > >>> > > > >>>> Following up on my "brake pedal not retracting' question from a > > while > > > >>>> ago, we finally got her into the shop and the diagnosis is that > it's > > > >>>> the brake booster (thanks for the pointer Ken!) > > > >>>> > > > >>>> My new question for the list is as to what repair/replacements we > > > >>>> might want to do while the dash is completely out. Would love to > > save > > > >>>> on duplicate labor costs if we can. > > > >>>> > > > >>>> This is for an 85 Westy. > > > >>>> > > > >>>> Thanks! > > > >>>> > > > >>>> > > > >>>> On Wed, May 17, 2017 at 1:27 AM, kenneth wilford (Van-Again) > > > >>>> <kenwilfy@comcast.net> wrote: > > > >>>>> Had this same problem on a VW Bus recently. It was the brake > > > >> booster. > > > >>>>> There is a spring inside that which allows the pedal to return. > We > > > >>> have > > > >>>>> them available on our site at www.vanagain.com if you need one. > > > >>>>> > > > >>>>> Ken > > > >>>>> > > > >>>>> > > > >>>>> On Wed, May 17, 2017, 2:22 AM J.C. <dougm+sfbayrangers@kzsu. > > > >>> stanford.edu > > > >>>>> > > > >>>>> wrote: > > > >>>>>> > > > >>>>>> Question for the list, that I haven't found a definitive answer > > for: > > > >>>>>> My girlfriend's 85 Westy has an issue wherein the brake pedal > > isn't > > > >>>>>> retracting into the resting position. Thus, the brakes are > > dragging > > > >>>>>> (and the temporary solution has been to use one's foot to > retract > > > >> the > > > >>>>>> pedal while driving.) The brakes themselves don't feel > mushy/soft, > > > >>>>>> thus it doesn't seem to be a master cylinder issue, or air in > the > > > >>>>>> lines. > > > >>>>>> > > > >>>>>> My 1st thought was that there was an issue with the spring, but > > (as > > > >>>>>> well as I could tell) it doesn't appear to be broken, and it > does > > > >>>>>> appear to be attached. > > > >>>>>> > > > >>>>>> Does anyone have an idea as to how to diagnose and repair? > > > >>>>>> > > > >>>>>> (Searched the 1st 8 pages of results from a search of the > archives > > > >> but > > > >>>>>> couldn't find anything.) > > > >>>>>> > > > >>>>>> Thanks. > > > >> > > > > > >
Have something to add on this topic today? Revive this thread in the forum »