I redid a whole set of carat bumpers back to original colors some time
back. For small pocks and nicks, a good tube of spot filler from a BODY
SHOP not a FLAPS is very good. For larger gashes, bondo. For cracks, remove
material, fiberglass the back and bondo/fill the front. Then spray with
high-build primer and sand until you can't see any imperfections in the
glare of a work light. The SEM black you mentioned is a very good one. Try
to use real primer not a spray can though a spray can, with enough effort,
could work.

Jim

On Fri, Jul 14, 2017 at 1:42 PM John Goubeaux <jlgoubeaux59@gmail.com>
wrote:

> Hello Folks,
>
> I'd like to elicit some advice on repairing and painting the fiberglass
> bumpers and side cladding from a 90 tintop.
>
> The repairs needed are minimal, just some minor dings and splits,
> nothing that appears like a major split or crack at this point.
>
> I'd also like to spray the bumpers and cladding black, and am at this
> point considering testing with SEM Bumper Coater (flexible black)
>
> *So, my questions are:*
>
> Does anyone have a repair step and product recommendation ? I'm also
> looking at  "SEM MiniMax bumper repair epoxy"
>
> Are there any paint recommendations, or folks that have had good results
> with something specific ?
>
> Any ideas and or experience is appreciated.
>
> -john
>