

| Subject: | Re: Speedometer Cable |
| From: | Keith Hughes |
| Date: | Wed, 12 Jul 2017 15:32:51 +0000 |
Hi Alistair, Thanks. Yes, new dustcap with the cable install. I pulled the cap yesterday and ran the cable with a drill, and still have the bounce. I lubed the cable well with 3-in-1 oil on install (it was quite difficult to turn by hand). I adjusted the cable to minimize it, but still there. I heard from FAS where my conversion was done that they have had a lot of cable issues with Gemo over the last year, and had to replace a bunch. Apparently that's been resolved, but I don't want to dump another $50, delivered, only to get another old-stock cable with the same issues. Keith Hughes '86 Westy GenV (Marvin) -------------------------------------------- On Wed, 7/12/17, Alistair Bell <albell@shaw.ca> wrote: Subject: Re: Speedometer Cable To: "Keith Hughes" <keithahughes@YAHOO.COM> Cc: vanagon@GERRY.VANAGON.COM Date: Wednesday, July 12, 2017, 8:13 AM Keith, It's been a while since I've worked with 2wd cable, but seeing as no one else has chimed in, I'll take a stab. Is the square hole in the cap on the hub, where the cable end goes thru, in good shape? I mean is it square to match the cable end? And the little circlip on the cable end in place? Alistair > On Jul 11, 2017, at 6:45 PM, Keith Hughes <keithahughes@YAHOO.COM> wrote: > > To all you folks that have struggled with the bouncy speedo needle, has anyone found a reliably good replacement cable? I replaced mine with a Van-Cafe version early this year (Gemo brand) and it reduced the bouncing but still there. Just installed a rebuilt speedo head from GoWesty, and have the same bouncing problems (causing my cruise control to be glitchy). I've done all of the tweaking and adjusting I can to little avail. I've seen good reviews of cables from most of the usual suspect vendors, and bad reviews from most as well. Seems a lot of QC issues with most, apparently. > > What say you list gurus? Anyone with a tried and true, used to bounce like kangaroo on meth but now stable as a glacier, replacement suggestions? > > Keith Hughes > '86 Westy GenV (Marvin)
Have something to add on this topic today? Revive this thread in the forum »