Jim, I do offer the washers and nuts without the sleeves. Just click the drop-down menu for that option. And just so you know, if you order off of the  website, the shipping calculator has a minimum charge of $6.49, but if I can ship it cheaper I will send a refund for the difference. 

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Jim Felder
Sent: Monday, July 17, 2017 6:54 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: ISO upper and lower cupped steel washers for bottom sway bar mount

Yes, thanks but I'd hate to pay 25 bucks for just the two washers I need.
The other stuff came with the poly bushing order, but not the washers. Now I would have to buy that stuff over again. Still holding out for someone with a pair of the cupped washers only.

Jim

On Mon, Jul 17, 2017 at 8:11 PM Steven Shelton <shelton4@gmail.com> wrote:

> Are these what you need:
>
>
> http://www.t3technique.com/suspension-and-drivetrain/vanagon-suspensio
> n/front-suspension-parts/hardware/stainless-steel-endlink-hardware-kit
> .html
>
>
>
> On Mon, Jul 17, 2017 at 8:30 PM, Jim Felder <jim.felder@gmail.com> wrote:
>
>> Good idea. Will do that if I don't find any actual vanagon equipment. 
>> I do worry about about the size of the hole, it has to contain the 
>> sleeve that goes in there.
>>
>> Thanks,
>>
>> Jim
>>
>> On Mon, Jul 17, 2017 at 7:12 PM Dan N <dn92610@gmail.com> wrote:
>>
>> > some old cars use the same cupped steel washers for the upper bold 
>> > of
>> the
>> > shock absorbers. I went to a junk yard, open the hood, look, found 
>> > them
>> and
>> > remove them... sorry I forgot the brand the the junk...
>> >
>> > dan
>> >
>>
>
>