Done. I will take care of this order tomorrow.

Thanks,

Jim

On Mon, Jul 17, 2017 at 9:38 PM T3 Technique <christopher@t3technique.com>
wrote:

> Jim, I do offer the washers and nuts without the sleeves. Just click the
> drop-down menu for that option. And just so you know, if you order off of
> the  website, the shipping calculator has a minimum charge of $6.49, but if
> I can ship it cheaper I will send a refund for the difference.
>
>
>
>
>
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf
> Of Jim Felder
> Sent: Monday, July 17, 2017 6:54 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Re: ISO upper and lower cupped steel washers for bottom sway bar
> mount
>
> Yes, thanks but I'd hate to pay 25 bucks for just the two washers I need.
> The other stuff came with the poly bushing order, but not the washers. Now
> I would have to buy that stuff over again. Still holding out for someone
> with a pair of the cupped washers only.
>
> Jim
>
> On Mon, Jul 17, 2017 at 8:11 PM Steven Shelton <shelton4@gmail.com> wrote:
>
> > Are these what you need:
> >
> >
> > http://www.t3technique.com/suspension-and-drivetrain/vanagon-suspensio
> > n/front-suspension-parts/hardware/stainless-steel-endlink-hardware-kit
> > .html
> >
> >
> >
> > On Mon, Jul 17, 2017 at 8:30 PM, Jim Felder <jim.felder@gmail.com>
> wrote:
> >
> >> Good idea. Will do that if I don't find any actual vanagon equipment.
> >> I do worry about about the size of the hole, it has to contain the
> >> sleeve that goes in there.
> >>
> >> Thanks,
> >>
> >> Jim
> >>
> >> On Mon, Jul 17, 2017 at 7:12 PM Dan N <dn92610@gmail.com> wrote:
> >>
> >> > some old cars use the same cupped steel washers for the upper bold
> >> > of
> >> the
> >> > shock absorbers. I went to a junk yard, open the hood, look, found
> >> > them
> >> and
> >> > remove them... sorry I forgot the brand the the junk...
> >> >
> >> > dan
> >> >
> >>
> >
> >
>
>