So David, My panel shows an amber light even with a full tank, not a green
one.  I mentioned this a while back, and asked for explanation from anyone
who might have one, but got no response.  Is this likely also due to a bad
chip like you described?

Thanks, mcneely

On Fri, Jul 28, 2017 at 12:43 PM, David Beierl <dbeierl@attglobal.net>
wrote:

> Of course the LM324 is a 14-pin DIP, not 12-pin.  My head knew that but
> apparently my finger didn't.
>
> :)
> d
>
> On Fri, Jul 28, 2017 at 1:22 PM, David Beierl <dbeierl@attglobal.net>
> wrote:
>
> > LM324N 12-pin DIP chip on that side has gone bad.  DigiKey has them for
> > USD 0.50 in singles.  Any electronic parts place should have them.  For
> > easy removal, clip the chip from its leads and remove them individually.
> >
> > https://www.digikey.com/product-detail/en/texas-
> > instruments/LM324N/296-1391-5-ND/277627
> >
> > Yrs,
> > d
> >
> > On Fri, Jul 28, 2017 at 12:47 PM, gilles.turmel <
> > gilles.turmel@sympatico.ca> wrote:
> >
> >> À friend of mine has an 86 Westfalia, no light is showing from the water
> >> tank level sensor. The sensor was changed, no lights. Anyone has a clue
> on
> >> the problem. Best regards.
> >>
> >>
> >> Envoyé de mon appareil Samsung de Bell via le réseau le plus vaste au
> >> pays.
> >
> >
> >
>