If you're not getting +12 on the coil positive side, then ignition switch
is likely reason.  But before you said you *do* have power to the coil.

If you jumper 12V to the coil positive side that is the same as turning the
key on.  It will even back-feed the instruments.  This can be handy for
testing or as a quick fix.

Yrs,
d

On Sat, Aug 5, 2017 at 10:14 PM, Richard Golen <rgolen@hotmail.com> wrote:

> No getting keyed power to the coil. Not getting spark to the coil..
>