

| Subject: | Re: Borescope: Inspect Transaxle 3/4 Slider Hub? |
| From: | Patrick Seurynck |
| Date: | Wed, 2 Aug 2017 03:18:00 +0000 |
Over the last year I have been having occasional issues with getting my 84' 4 speed into 1st. Over that time I have rebuilt the entire linkage with GoWesty parts and put in new T3 shifter tabs. I have been greasing the linkage bushings with T3 shifter grease and all works well for a month or so but then I have to clean and regrease the bushings. Once that is done it is fine, for a while. Today it suddenly would not go into 1st. No warning. I got it going using 2nd but at the next stop It would not go into any gear. I had to leave it parked and returned with WD40 to clean the linkage bushings. From underneath I was able to get them cleaned and got the shifter rod moving smoothly in and out of gears. I got inside and it shifted smoothly but when I started it up it would not go into any gear. Turned off it went into gear. What am I looking at here? Any ideas? Thx Patrick On Tue, Aug 1, 2017 at 8:34 PM Dennis Haynes <d23haynes57@hotmail.com> wrote: > Popping out of 4th gear is usually a main shaft bearing problem or the > housing for it. Getting stuck in 3rd or 4th is usually the slider hub. > Losing 3rd or 4th is the drive hub breaking off the gear. > > Dennis > > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf > Of joe kallo > Sent: Tuesday, August 1, 2017 7:01 PM > To: vanagon@GERRY.VANAGON.COM > Subject: Re: Borescope: Inspect Transaxle 3/4 Slider Hub? > > Mine, which died this spring, started with occasionally popping out of 4th. > I had never heard of the 3/4 slider issue, so I always just assumed I'd > not managed to get it all the way into gear. Then I started having problems > shifting out of 4th occasionally. That's when I started doing some research > and learned the bad news. > > Joe > > On Tue, Aug 1, 2017 at 5:52 PM Richard Koerner <rjkinpb@sbcglobal.net> > wrote: > > > I've got 251,000 on my original manual transmission in an 85 tintop. > > I drive it really gently, always have, and my van is really light; I'm > > the second owner; bought with 32,000 miles. I now have 2.2 Subie > > motor but only use the extra power occasionally. Shifts silky smooth > > too; just got shifter ball replaced, it broke after 250,00 > > miles....just went "pop" one day while shifting into reverse to back out > of garage. > > > > BTW...what are the "warning" signs when a transmission is starting to > die? > > Rich > > San Diego > > > > > > From: Dennis Haynes <d23haynes57@HOTMAIL.COM> > > To: vanagon@GERRY.VANAGON.COM > > Sent: Tuesday, August 1, 2017 3:21 PM > > Subject: Re: Borescope: Inspect Transaxle 3/4 Slider Hub? > > > > You are a lucky one! Not the only one but lucky just the same. Are you > > the original owner? Proper care and feeding along with gentle driving > pays off. > > > > Dennis > > > > -----Original Message----- > > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On > > Behalf Of Steven Shelton > > Sent: Tuesday, August 1, 2017 6:17 PM > > To: vanagon@GERRY.VANAGON.COM > > Subject: Re: Borescope: Inspect Transaxle 3/4 Slider Hub? > > > > I have 287,755 miles on my original transaxle. > > > > < > > https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_c > > ampaign=sig-email&utm_content=webmail&utm_term=icon > > > > > Virus-free. > > www.avast.com > > < > > https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_c > > ampaign=sig-email&utm_content=webmail&utm_term=link > > > > > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2> > > > > On Tue, Aug 1, 2017 at 4:30 PM, Neil N <musomuso@gmail.com> wrote: > > > > > Would suggest it depends on how it's driven, type of gear oil used, > > > engine type, is it a rebuilt, by who, etc. My buddy has at least > > > 400,000 KM's (250,000 miles) on his '85 original transaxle. > > > > > > Neil. > > > > > > On 8/1/17, steve meassick <stevem@tdhvac.com> wrote: > > > > > > > What is the consensus on how long the manual transmissions really > > > > last before they start failing? > > > > Steve > > > > > > > > > > > > > -- > > > Neil n > > > > > > Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca> > > > > > > 1988 Westy Images > > > <https://picasaweb.google.com/musomuso/New1988Westy> > > > > > > 1981 Westfalia "Jaco" Images, technical > > > <http://tubaneil.googlepages.com/> > > > > > > Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay> > > > > > > > > > > > > -- Sent from Gmail Mobile
Have something to add on this topic today? Revive this thread in the forum »