I use the cover from Airhead parts.  It's a good snug fitting cover.
Breathable material, no inside flocking.  It spent about a year and a half
on my tin top while I was working on the new engine harnesses and hoses.  My
mistake was to use the lock grommets as the cinch points for an underbelly
rope.  I thought it would flap less if I cinched thing tight.  As it turns
out you can't beat mother nature, the wind was enough to move the rope
enough to wear into the paint on the rocker panels.  One thing nice is the 4
year warranty.  Into the second year, while "stretching" it on, I tore it.
I called Airhead and described the issue, they asked me to send pictures, I
did and they sent me a new cover.

Here's a picture. https://tinyurl.com/ybs7as6l

-Dick-

-----Original Message-----
From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of
Chris S
Sent: Tuesday, August 15, 2017 5:59 PM
To: vanagon@GERRY.VANAGON.COM
Subject: Re: Vanagon Cover?

Thanks all for the replies and mouse advice. I think I will go with Noah car
cover. My Westy will spend a few months in the same storage place I kept it
for five months earlier this year with no mouse problems, fingers crossed.