ok. Thanks.

Would suggest checking to see if flame changes size (brightness at
viewer) when turning the thermostat.

On 9/3/17, Andre Fiedler <fiedlerac@gmail.com> wrote:

> Fridge has worked reasonably well on propane up until recently.  It was
> cooling  at the beginning of a week long road trip but by the end of the
> week even though the pilot flame was still lit it no longer cooled below
> ambient air temp.
>
> On Sun, Sep 3, 2017 at 4:38 PM, Neil N <musomuso@gmail.com> wrote:
>
>> Did the fridge work properly on propane before?
>>
>> Once its lit, use a cardboard tube to view the flame at the viewfinder
>> in LH lower corner inside the fridge. Let the fridge cool down for an
>> hour or so then while looking at the flame, turn the thermostat up and
>> down. As you do, you should hear a "click" and the size of flame (or
>> brightness in viewer I guess) should change with that "click". Bigger
>> flame when more cooling required, smaller when not. (thermostat turned
>> down)

--
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>