.... at home, I measured the crank journals and found that they were
within spec. Machine shop confirmed this. All that was required was a
polish to each journal. I checked end play when block et al was re
assembled. All goot.

Neil.

On 9/23/17, Neil N <musomuso@gmail.com> wrote:

> .... Crank and cam looked ok, I double checked bearing
> clearances with Plastigauge after I got all back from machine shop.
> All was within spec.
--
Neil n

Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>

1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>