Neil, what did you do with the deck lid clearance for the crossflow?

On Oct 2, 2017 3:31 PM, "Neil N" <musomuso@gmail.com> wrote:

> Much thanks Mark.
>
> Yes. Tape is level with oil pan as is the builders level.
>
> Input shaft is cut!
>
> Thanks again!
>
> Neil.
>
> On 10/2/17, vw_van_fan_Mark <madvws@cox.net> wrote:
> > Since the tape measure bridging the 2 lower tranny studs appears to be
> > parallel to the bottom of the 50 degree oil pan, YES.
> >
> > Mark
> >
> >
> >
> > Neil N wrote:
>
> >> Image showing stud distance OC, studs mounted to Kennedy adaptor plate:
> >>
> >> https://photos.app.goo.gl/xHEc4x7kGZjkKXj63
> >>
> >> Image showing level on studs, lining up with oil pan bottom,
> >> protractor angle finder at 50º
>
>
> --
> Neil n
>
> Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>
>
> 1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>
>
> 1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>
>
> Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>
>