I would suspect the hazard switch on the dash. Try rocking it back and
for very firmly a dozen times or so. That may fix it.

The hazard switch sits in the open position for months and years at a
time. The switch contacts can get dirty and then don't make good contact
when you finally need them to.

Mark

Bruce Todd wrote:
> Hi all - my hazard signals are only working on the driver's side and not
> the passenger side front or back.  With lights on or off they only work on
> the driver's side front and rear.
>
> The turn signal indicators all work otherwise under regular use.
>
> Is this pretty much a relay issue or is there possibly another cause?  This
> is a 1986 Westfalia Syncro.
>
> Thanks.
>
> Bruce
>