

| Subject: | Re: Where best to check my Westy water system? |
| From: | Neil N |
| Date: | Sat, 20 Jan 2018 17:27:04 -0800 |
On a road trip, some years ago, I recall attempting to "fix" (lubricate) my NON submersible pump. It worked for a little while longer but failed soon enough. I have no idea if installing a pump under the sink is easily feasible for Westies with in tank pumps but the "Nautilus" Sureflo pump I installed in 2009 has been quite reliable for what it's worth. Draws more current though. Image showing stock pump and Sureflo https://tinyurl.com/ybeqbvll Neil. On Sat, Jan 20, 2018 at 2:13 PM, Jim. Felder <jim.felder@gmail.com> wrote: > That did the trick! I found per Neil that there was 12.23 v to ground from > the faucet switch. Next I pulled the pump from the tank, and saw the small > tang in the bottom. Turned it--it sounded very gritty. Got a pair of pliers > and worked it back an forth. It took three tries until it would run, but it > did. I watched cloudy water come out at the sink. In my opinion, it should > be running stronger, but it got too dim on that side of the house as the > sun is setting. I will try to flush it out more in the morning. > > Thanks all, > > Jim > > -- Neil n Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca> 1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy> 1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/> Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>
Have something to add on this topic today? Revive this thread in the forum »