I don't have the link, but Ken at Van Again has a similar kit

On Feb 10, 2018 3:31 PM, "Neil N" <musomuso@gmail.com> wrote:

> Foreign Auto Supply has some really cool stuff. IMO, their "Inline 4
> cylinder vanagon engine conversion "basic install kit" is good value for
> someone who doesn't have time, inclination to source and fabricate the
> parts. Link to that kit:
>
> http://www.foreignautosupply.com/parts-accessories/67-in-
> line-4-cylinder-vanagon-engine-conversion-basic-install-kit/
>
>
> On Sat, Feb 10, 2018 at 12:42 PM, Ralph Meyermann <
> ralphmeyermann@gmail.com> wrote:
>
> I'm running the 50° set up original to my 82. Went mechanical TDI pump to
>> keep it simple with one wire to help avoid codes/limp modes. IIRC the
>> 1z/ahu can use the original 50° oil pan. I believe fast makes 50° oil pans
>> for later TDI engines and Weddle says they have 50° bell housing for
>> 091+094 transaxles.
>>
>> On Feb 10, 2018 1:38 PM, "Neil N" <musomuso@gmail.com> wrote:
>>
>
>
>> .... Then, engine mount
>>> angle; 50 degree or 15 degree?
>>>
>>>
>>
>>
>
> Blog: Vanagons, Westfalia, general <http://tubaneil.blogspot.ca>
>
> 1988 Westy Images <https://picasaweb.google.com/musomuso/New1988Westy>
>
> 1981 Westfalia "Jaco" Images, technical <http://tubaneil.googlepages.com/>
>
> Vanagon-Bus VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>
>