Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
Subject:Re: Fuel pressure too high
From:David Beierl
Date:Tue, 6 Mar 2018 16:59:03 -0500

>
> So since I do not have power at 30 terminal on the Digifant relay, I must
> have a break in the line between that and the Alt B+ terminal. In tracing
> the wire from the alternator, I thought it entered the wire distribution
> box and connect to the post in the upper LH corner.  Is that correct?
>

I think it's near the upper right corner, but yes.  If no B+ at relay 30
terminal, either bad wire to B+ post or from there to alternator, or from
alternator to starter battery post (in New England those connections rot
off at the starter).

Yrs,
d