There is no voltage to either points on those fuses on both of them with engine on and also off.

Thanks
Bryan

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10

________________________________
From: Neil N <musomuso@gmail.com>
Sent: Wednesday, April 25, 2018 2:52:04 PM
To: B Feddish
Cc: vanagon
Subject: Re: Wiring for sink, etc.

Assuming your volt meter or test light was connected to a good ground point and that the fuse holder contacts are clean, (with a good fuse installed of course), you should see battery voltage at both ends of one of those fuse holders even if engine is off. Or..... if the sink pump etc connect to an aux battery, is that battery and connections to it ok?

Neil.

On Wed, Apr 25, 2018 at 9:35 AM, B Feddish <UprightBassGhost@hotmail.com<mailto:UprightBassGhost@hotmail.com>> wrote:

..... I have checked the fuses behind the drivers seat.  They are both good but I noticed neither terminal had voltage on it either stationary or when the engine is running.

--
Neil n

Blog: Vanagons, Westfalia, general<http://tubaneil.blogspot.ca>

1988 Westy Images<https://picasaweb.google.com/musomuso/New1988Westy>

1981 Westfalia "Jaco" Images, technical<http://tubaneil.googlepages.com/>

Vanagon-Bus VAG Gas Engine Swap Group<http://tinyurl.com/khalbay>