

| Subject: | Re: tire pressures and alignments |
| From: | David McNeely |
| Date: | Wed, 18 Jul 2018 08:28:44 -0700 |
I run 195R14D, but the placard and owner's manual give the 43/53 psi specification for 185R14, also. mcneely On Wed, Jul 18, 2018 at 8:12 AM, ddbjorkman@verizon.net < ddbjorkman@verizon.net> wrote: > What size tires are you running? The placard on my '87 tells a different > story for my 185/14's. > > Dave B. > > > -----Original Message----- > From: David McNeely <davmcneely40@GMAIL.COM> > To: vanagon <vanagon@GERRY.VANAGON.COM> > Sent: Tue, Jul 17, 2018 1:45 am > Subject: Re: tire pressures and alignments > > Why not go with the door placard inflation pressures? On my 1991 > Volkswagen Vanagon GL Campmobile that is 43 psi front, 53 psi rear. > Perhaps increase per load, but you would need the proper formula and axle > weights to do it right. I always figure the VW engineers knew better than > me. So I go by their recommendations. I have found that most shops seem > not to have a clue, and when I tell them the proper inflation, they act > like I'm crazy. But, I tell them to check the specifications and they > either get defensive, or apologize for their mistake, depending mostly on > their age and sensibilities. > > mcneely > > On Mon, Jul 16, 2018 at 3:28 PM, Gabriel Hourtouat <ghourtouat@gmail.com> > wrote: > > > Should wheel alignments be done with an unladen van? > > > > (Or should I load it up with some concrete blocks, etc, to simulate the > > kind of load that the van will carry on road trips?) > > > > Any special considerations for an alignment? > > > > > > > > New tires: Continental Vanco Four Season 185R14C rated D (load range 102 > / > > 100 Q) are rated for 1874 kg at 65psi. > > > > What pressure would you run them? > > > > > > (I have gone to: 45 front, 49 rear, psi.) > > (The shop inflated them to: 34, 36, 40 and 42. Or, random, in other > > words.) > > > > Any advice welcome. > > > > cheers, > > gab > > 86 Westy 2.1 WBX > > >
Have something to add on this topic today? Revive this thread in the forum »