There are screws on either side that need to be removed. 

> On Jul 26, 2018, at 7:27 AM, Dennis Haynes <d23haynes57@HOTMAIL.COM> wrote:
> 
> You have to knock it down. The stove top fits into a groove on top of the fascia. Dirt and corrosion makes the first separation tough. Once it starts to slide out it will separate easily.
> 
> Dennis
> 
> 
> -----Original Message-----
> From: Vanagon Mailing List <vanagon@gerry.vanagon.com> On Behalf Of thewestyman
> Sent: Wednesday, July 25, 2018 9:05 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Trying to take off the faceplate
> 
> Hi to all,
> 
> I am fighting to take off the kitchen unit’s face plate.
> I have already removed the three little screws from under it.
> Took the knobs off the gas valves.  
> The plate moves out a little at the bottom.
> I was trying to hit it from the bottom to lift it out of the stainless steel top.  
> It did not move any.
> Is there anything holding it back?
> What is it I’m doing wrong?
> 
> Anyone?
> Zoltan