OK, I start with that.

Thanks,
Bryan

Get Outlook for iOS<https://aka.ms/o0ukef>
________________________________
From: Jim. Felder <jim.felder@gmail.com>
Sent: Monday, July 30, 2018 6:42:08 PM
To: B Feddish
Cc: vanagon@gerry.vanagon.com
Subject: Re: Blinking lights after ground fix

Maybe the grounding starts themselves are now well grounded. Also pull the long vertical connector off the back of the cluster and make sure there is a good connection to the foil. It only takes a minute or two to add another ground to the two brown wires to the connector. That one will really mess with the instruments.

Jim

On Mon, Jul 30, 2018 at 5:33 PM B Feddish <UprightBassGhost@hotmail.com<mailto:UprightBassGhost@hotmail.com>> wrote:
This weekend I took all the ground wires off the wall, cleaned them and put them back on. The ground strap is a year old an still looks fine. The van seems be running smoother and the idle is better. Problem is now the oil light, alt light and ox light are all flickering. I took all the wires off again, cleaned even more than back on and the flickering was gone for 5 minutes but came back. The alt and O2 flicker dimly together and the oil light comes on bright and flickers at a different rate than the other 2.  They do not do this when idling, mostly when accelerating.   Which wires should I investigate?

1983.5 WC Westy.

Thanks,
Bryan

Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10