

| Subject: | Re: Blinking lights after ground fix |
| From: | OlRivrRat |
| Date: | Tue, 31 Jul 2018 08:58:47 -0600 |
I think B Feddish is talking about Eng' Bay Grounds & J Felder is talking about
Under/In Dash grounds > Would be helpful if Complete descriptions were included
when asking for & providing help with diagnosing ~
ORR ~ DeanB
On 30 Jul , 2018, at 4:56 PM, B Feddish wrote:
> OK, I start with that.
>
> Thanks,
> Bryan
>
> Get Outlook for iOS<https://aka.ms/o0ukef>
> ________________________________
> From: Jim. Felder <jim.felder@gmail.com>
> Sent: Monday, July 30, 2018 6:42:08 PM
> To: B Feddish
> Cc: vanagon@gerry.vanagon.com
> Subject: Re: Blinking lights after ground fix
>
> Maybe the grounding starts themselves are now well grounded. Also pull the long vertical connector off the back of the cluster and make sure there is a good connection to the foil. It only takes a minute or two to add another ground to the two brown wires to the connector. That one will really mess with the instruments.
>
> Jim
>
> On Mon, Jul 30, 2018 at 5:33 PM B Feddish <UprightBassGhost@hotmail.com<mailto:UprightBassGhost@hotmail.com>> wrote:
> This weekend I took all the ground wires off the wall, cleaned them and put them back on. The ground strap is a year old an still looks fine. The van seems be running smoother and the idle is better. Problem is now the oil light, alt light and ox light are all flickering. I took all the wires off again, cleaned even more than back on and the flickering was gone for 5 minutes but came back. The alt and O2 flicker dimly together and the oil light comes on bright and flickers at a different rate than the other 2. They do not do this when idling, mostly when accelerating. Which wires should I investigate?
>
> 1983.5 WC Westy.
>
> Thanks,
> Bryan
>
>
> Sent from Mail<https://go.microsoft.com/fwlink/?LinkId=550986> for Windows 10Have something to add on this topic today? Revive this thread in the forum »