Turns out I got it backward. It's the T (10-pin), not M switches that rarer
than gold.

Thanks for the pointers, David. I'll check it out.

-MB

On Wed, Aug 22, 2018 at 3:25 AM David Beierl <dbeierl@attglobal.net> wrote:

> On Wed, Aug 22, 2018 at 3:48 AM, Mark Belanger <mbelanger@gmail.com>
> wrote:
>
>> Sorry. I should have been more clear. All the devices running off fuse 3
>> are wired directly to the aux battery (with an inline 15A fuse protecting
>> them).
>>
>
> Ok -- inside lights, cigar lighter, radio, clock.
>
>
>> As for measuring voltage off pin 30 on the switch, does it matter which
>> one?
>>
>
> Bentley only shows one 30 terminal (vs two on the older switch) but if
> there are two of them either one will do.
>
> If ok there, check 58 pin (gray/green) with switch on.
>
> If ok there, trouble has to be wire between there and fuse/relay panel pin
> A24.
>
> Diagram is on 97.211.
>
> Yrs,
> d
>

--
________________________________________________________________________
Mark Belanger - mbelanger@gmail.com