

| Subject: | Re: Headlights get condensation |
| From: | kenneth wilford (Van-Again) |
| Date: | Mon, 25 Feb 2019 08:47:01 -0500 |
I usually use some alcohol that we use with paint work. Put that inside the light and slosh it around. It will absorb the water and then evaporate out. You may have to do this a few times. Then inspect the light and if there is an obvious route for water to get inside (like a stone hit in the front), then you can seal it with clear sealant. For stone hits I would recommend replacing the light though. If you think it is leaking around the edge then you can seal that. The light bulb should have an o-ring on it that is what is supposed to seal the rear of the light. Remember, never touch the bulb glass when installing. Your oils from your hand will vaporize and make a haze on the inside of the glass. Yup, you are a greasy pig and so am I. Humans and cleaness is really relative. Ken On Sun, Feb 24, 2019 at 5:05 PM Richard Smith (Smirby) <smirby@gmail.com> wrote: > I have this problem too and have tried all the usual / recommended ideas. > I haven't tried the sealant yet, so that will be my next step. > > It really seems to be humidity rather than rain, though, as it will > develop the moisture inside even in completely dry conditions. > > ...r > > Richard Smith > Smith@thecdm.ca > > > On Feb 24, 2019, at 11:28 AM, thewestyman <zolo@foxinternet.net> wrote: > > > > Sorry, I forgot. I always assume we are talking Vanagons of the 80s, but > > that's not good enough, because from 86 the headlights are different. > > So, yes, this is a 1989 Westfalia. > > Thanks for your patience. > > Zoltan > > > > -----Original Message----- > > From: OlRivrRat > > Sent: Sunday, February 24, 2019 6:13 AM > > To: thewestyman > > Cc: vanagon@GERRY.VANAGON.COM > > Subject: Re: Headlights get condensation > > > > Zoltan > > > > Van Model Year & HeadLight Type ? > > > > > >> On 24 Feb , 2019, at 12:38 AM, thewestyman wrote: > >> > >> I don’t remember this was ever a topic, but had to be, it must be very > >> common. > >> I think, the rubber seals don’t work anymore. > >> Is there a remedy for this ailment? > >> Zoltan > -- Thanks, Ken Wilford John 3:16 www.vanagain.com
Have something to add on this topic today? Revive this thread in the forum »