Skip to main content
Gerry | Vanagon
Checking account...
← vanagon.com home · Continue the discussion in the forum
VanagonEuroVan
Subject:Re: Rearview Camera Cable Routing
From:Mark Belanger
Date:Mon, 8 Apr 2019 23:25:02 -0700

I installed a self-powered sub-woofer under the rear bench and was able to
run a RCA cable pair along the driver's side carpet behind the cabinet.
From there it's a straight shot to the back. I had it done in about 30
minutes.

As a bonus, Backup camera cables are typically a single RCA cable and are
quite thin, so you can stretch a rubber grommet over one of the plug ends,
then drill a hole from the engine compartment to beneath the rear bench
seat that is the width of RCA plug, which is then filled by the grommet
after the cable is pulled through.

-MB

On Mon, Apr 8, 2019 at 9:35 AM Steven Johnson <sjohnso2000@gmail.com> wrote:

> Well Westy owners, I'm trying to see if I can get a reaview camera cable
> from
> under the bench area to the engine compartment.   I've looked with
> google/Samba and don't see anything that helps me.   When I look at the
> driver's side of the
> rear engine compartment, I can see the electrical wire bundle going up to
> the
> A/C circuitry that resides behind the rear cabinetry.   I'd really like to
> use that
> access but I don't want to push too hard on that bundle for fear of messing
> that
> up or making it too confined.
>
> Alternately, I can't find a pic of a good way to route through from either
> the
> Computer module or even the rear heater hoses.
>
> I'd like to hear suggestions from this group before making a decision.
>  I'd really
> prefer not to route this externally.
>
> Thanks,
>
> Steven
> 91 Westy
>

--
________________________________________________________________________
Mark Belanger - mbelanger@gmail.com

Have something to add on this topic today? Revive this thread in the forum »