Hi All,

Well, my solution involved Dawn dish soap.    I lubed the electrical A/C
bundle shield with the dish soap,
taped up the plug tip and swabbed some dish soap on it as well and fairly
easily passed it through the
opening between the engine compartment and the bed area underneath the
drivers side cabinet.   Glad
I didn't have to drill another hole.    I tie wrapped the engine side to
the fuel rail (not real tight) and left it
for now.   I want to test it again to make sure the video feed is still
good and not mangled.   The remaining
other end of the cable is just sitting tie wrapped at the ceiling.   I'll
route that after I've checked the video
again.

Thanks everyone for your valuable input!

Steven
91 Westy

On Mon, Apr 8, 2019 at 12:36 PM Steven Johnson <sjohnso2000@gmail.com>
wrote:

> Well Westy owners, I'm trying to see if I can get a reaview camera cable
> from
> under the bench area to the engine compartment.   I've looked with
> google/Samba and don't see anything that helps me.   When I look at the
> driver's side of the
> rear engine compartment, I can see the electrical wire bundle going up to
> the
> A/C circuitry that resides behind the rear cabinetry.   I'd really like to
> use that
> access but I don't want to push too hard on that bundle for fear of
> messing that
> up or making it too confined.
>
> Alternately, I can't find a pic of a good way to route through from either
> the
> Computer module or even the rear heater hoses.
>
> I'd like to hear suggestions from this group before making a decision.
>  I'd really
> prefer not to route this externally.
>
> Thanks,
>
> Steven
> 91 Westy
>
>
>