Not for a camera application, but I ran a wire in from the battery under
the seat. This went across the inside front of the underseat locker to the
double bulkhead on the passenger side end of the rear seat locker. From
there, into and under the "secret compartment" and from there forward under
cabinets and carpet--stopping for an inline fuse where it can be accessed
inside the pantry cabinet. From there forward under the front cockpit
carpet and up under the dash.

Jim

On Mon, Apr 8, 2019 at 11:57 AM Dan N <dn92610@gmail.com> wrote:

> you could squeeze the ECU harness and push the wiring along to get it to
> the engine bay..
> or drill a small hole in the firewall, put in a rubber grommet and push the
> wire thru it
> I don't see any harm to route it externally, going on the side by side with
> the fuel line.
>
> On Mon, Apr 8, 2019 at 9:35 AM Steven Johnson <sjohnso2000@gmail.com>
> wrote:
>
> > Well Westy owners, I'm trying to see if I can get a reaview camera cable
> > from
> > under the bench area to the engine compartment.   I've looked with
> > google/Samba and don't see anything that helps me.   When I look at the
> > driver's side of the
> > rear engine compartment, I can see the electrical wire bundle going up to
> > the
> > A/C circuitry that resides behind the rear cabinetry.   I'd really like
> to
> > use that
> > access but I don't want to push too hard on that bundle for fear of
> messing
> > that
> > up or making it too confined.
> >
> > Alternately, I can't find a pic of a good way to route through from
> either
> > the
> > Computer module or even the rear heater hoses.
> >
> > I'd like to hear suggestions from this group before making a decision.
> >  I'd really
> > prefer not to route this externally.
> >
> > Thanks,
> >
> > Steven
> > 91 Westy
> >
>