---------- Forwarded message ---------
From: David Beierl <dbeierl@attglobal.net>
Date: Thu, Apr 18, 2019 at 12:17 AM
Subject: Re: Oil buzzer won't stop
To: thewestyman <zolo@foxinternet.net>
Cc: vanagonlist a <vanagon@gerry.vanagon.com>

Have you done the obvious thing -- tested the pressure with a gauge?

Yrs,
d

On Thu, Apr 18, 2019 at 12:08 AM thewestyman <zolo@foxinternet.net> wrote:

> Hi guys,
>
> I thought, I have done all I could.  But that’s not enough.
>
> I did change both senders, the 0.3 bar between the tubes, and the 0.8 bar
> one behind the pulleys.
> Checked the continuity of the brown wires that lead to the wire box, and
> they have continuity.  The wires’ ends are new.  I have renewed most of the
> two wires.
> The 0.8 bar sender’s wire goes to the yellow/black wire.  Both wires have
> continuity up at the round connector.
>
> If I accelerate over 2000 the buzzer goes off.  The engine runs fine with
> the new gasket I just installed.
> It must have been badly overheated before it came to me.
>
> There must be something else that makes this happen.
>
> Maybe David has an idea.  Because I think, it can happen to anybody.
>
> Zoltan
> God bless the List
>