When my slider door doesn't unlock or lock with unlocking or locking of the
driver or front passenger door, it has usually been that the contact pins
are not making a good electrical contact with the plate.  I buff both with
a some fine sand paper or scotch pad and that usually solves my problem.

On Sat, Jun 29, 2019 at 9:19 PM OlRivrRat <OlRivrRat@comcast.net> wrote:

> On 29 Jun , 2019, at 9:22 PM, Dan N wrote:
>
> > hi Dean,
> >
> > also, by deduction... for example if you open/close the driver door -
> the passenger door + the sliding door open/close too - then the sender
> (driver door actuator) is good as it sends out the signal...
> >
> > so we deduct that the hatch actuator doesn't receive the signal... that
> the one to be fixed for not receiving the signal.
>
>         Unlocking or Locking either Front Door has No effect on Slider or
> Rear Hatch ~