the speedo cable is in a tight space so it's quite hard to get the lubing
device in there. I use silicone spray (thiner than chain lube) and lube
with a straw till it fill up to the top of the cable, wait a bit so gravity
will get it down, then I use a compressed air can with a straw a give a
blast. The blast of will force the liquid go farther down the cable. Repeat
the fill + blast of air about 10 times...

dan

On Fri, Jul 5, 2019 at 10:05 AM Neil N <musomuso@gmail.com> wrote:

> IIRC, some chain lubes are the "dry" type or rather, are not a thicker
> fluid type lube. I used the latter.
>
>
> On 7/5/19, Neil N <musomuso@gmail.com> wrote:
>
> > I recently quelled a noisy speedo with fluctuating needle by applying
> > motorcycle chain lube
>
>
> --
> Neil n
>
> VE7TBN
>
> 1988 Westy 50º ABA swap: https://tinyurl.com/yap5hpwt
>
> 1981 Westy 15º ABA swap: https://tinyurl.com/y9n4xob8
>
> VAG Gas Engine Swap Group <http://tinyurl.com/khalbay>
>