David B, any insight on narrowing down the 13,988 toggles they have listed?
I filtered for 12v and they show 0 results?

David M, thanks for the info. I had seen some write ups elsewhere that had
indicated that it was the most bang for buck since it works on a
temperature differential. Original design just uses convection as heat
rises up it is pulled under. However, when its 85/90 degrees out that
doesn't work so well. I plan on making it reversible to start to test and
then if it works well do a more permanent install.

thanks for the replies!
ryan

On Wed, Sep 11, 2019 at 2:36 PM David Beierl <dbeierl@gmail.com> wrote:

> Want it to
>> look as stock as possible so was going to use the little micro toggle
>> switches. Problem is can't seem to find any switches that small or even
>> closely match the stock. Anybody know where to source these?
>>
>
> You should find one here to suit:
> https://www.digikey.com/products/en/switches/toggle-switches/201?k=&pkeyword=&sv=0&sf=0&FV=ffe000c9%2C1140004%2C1f140000&quantity=&ColumnSort=0&page=1&pageSize=25
>
> Yrs,
> d
>