Hi,

I'd just run it in parallel with the fan on the back of the fridge. When
one comes on, the fan in the city water hookup port would go on.�  Nice
and simple :)

Cheers,
Steve Williams

On 11/09/2019 8:39 a.m., Ryan Perry wrote:
> Hey everyone!
> I've got my stock dometic fridge out after less than ideal performance this
> summer. I have decided to install an exhaust fan in place of my NEVER used
> city water hookup. (I live in the south so the van sees fairly high temps
> during the day)
>
> I see that the 80mm fans look to fit. Was going to run a new wire from fuse
> block and connect toggle over to the LED panel on the front. Want it to
> look as stock as possible so was going to use the little micro toggle
> switches. Problem is can't seem to find any switches that small or even
> closely match the stock. Anybody know where to source these?
>
> Anybody have good resources for any of these mods? Or more particular
> modifying the GoWesty city water hookup as an exhaust fan?
>
> Was also thinking about an internal fan for the fridge up top. Use the same
> line and locate in the same place on the LED panel. Might be a good idea
> while I have it out.
>
> Thanks as always!
> Ryan Perry