

| Subject: | Re: Hose from pressure cap on expansion tank to coolant overflow tank |
| From: | Dan N |
| Date: | Sun, 20 Oct 2019 09:59:30 -0700 |
I just kook at that hose on one of my van (VW Audi logo) 443121107 APX07x2.5x5000 on my other van ArmorMark 50060 5/16" (7.9mm) -> I think this is from Autozone On Sun, Oct 20, 2019 at 6:13 AM John H. Lauterbach <john@jhl.mgacoxmail.com> wrote: > Thank you, Gene. I would appreciate it if you would post the Gates Part > Number > for the hose you are using. I was able to find anything like what the > stock > hose is on the Gates website. > John > On Thu, 2019-10-17 at 18:53 -0700, Gene P wrote: > > Probably not at all chains but at a local auto supply I gotGates 5/16 > (8.0mm) > > premium heater hose, made in USA.It’s straight heater hose, buy what you > need > > by the foot. > > From: John H. LauterbachSent: Thursday, October 17, 2019 6:07 PMTo: > > vanagon@GERRY.VANAGON.COM > > Subject: Re: Hose from pressure cap on expansion tank to coolant > overflow tank > > Thank you, Dan. I went to the local AutoZone and O'Reilly's and neither > > storehad anything close except for high-pressure fuel lines. That is > why I > > posted tothe list. John > > On Thu, 2019-10-17 at 17:44 -0700, Dan N wrote: > > > cut a short section of the hose and bring it to any auto-parts store > > > andtheywill match it.On Thu, Oct 17, 2019 at 4:15 PM John H. > Lauterbach < > > > john@jhl.mgacoxmail.com>wrote: > > > > What are the correct dimensions (ID, OD, Length) for subject hose, > > > > andwheredoI get it? I have seen some hoses on list vendor websites > > > > thatlooksimilar, butnot the same.If one cannot get a direct > replacement > > > > hose, what are the alternatives?Thank you,John >
Have something to add on this topic today? Revive this thread in the forum »