

| Subject: | Re: 1991 Vanagon GL passenger -- Fuses 12 and 13 Good, but things don't work -- Update |
| Date: | Tue, 17 Dec 2019 14:04:47 +0000 |
Hi Skip. On Diane's and my RT. 66 trip, I had a fuse block meltdown that affected the radiator fan. We left the Painted Desert/Holbrook area early in the AM, so fan not needed and drove down to Phoenix and Affordable German (great place) and he popped in a block from a '91 he had in back. Quick and easy. With care, you have the talent to do it in your garage. I believe our '87 goes faster with the '91 block. They are somewhat interchangeable. Maybe someone on the list can give you more info on interchangeability, Dave B. -----Original Message----- From: John H. Lauterbach <john@JHL.MGACOXMAIL.COM> To: vanagon <vanagon@GERRY.VANAGON.COM> Sent: Sun, Dec 15, 2019 1:54 pm Subject: Re: 1991 Vanagon GL passenger -- Fuses 12 and 13 Good, but things don't work -- Update Thank you to all who replied. Replacing 12 with a brand new fuse got most things that Bentley says are on 12 working. Exceptions are power mirrors and A/C (but maybe that is someplace else). Fuse 13 fell apart when I went to remove it. I got a new fuse into what was left of the holder and now both front and rear heater blowers work. Clearly a new fuse/relay panel is needed. John On Thu, 2019-12-12 at 20:03 -0500, David Beierl wrote: > > > > Thank you for asking, David. Wipers, headlights, tail lights, stop lights, > > etc. are fine. Radio also works (but in SAFe mode -- tried the work > > arounds, but no success). Everything else works except what Bentley says > > are on 12 and 13. > > > > Both those fuses run off the load reduction relay. The fact that wipers > and headlights are good says that the ignition switch and load reduction > relays are both working correctly. Turn the key on and check for 12V at > both sides of the fuse sockets. If you *don't* have 12v on at least one > side of both fuses, there's an internal problem in the fuse/relay panel and > you will need a new one. > > Check and say results.
Have something to add on this topic today? Revive this thread in the forum »