

| Subject: | Re: OBD2 gauges |
| From: | Harry Hoffman |
| Date: | Sun, 16 Feb 2020 09:28:14 -0500 |
Hey Kyle, I’ve got a Bostig install and don’t have the issues you describe. Mine is one of the original series but there were electronics to adjust the tach. I had hooked up a Bluetooth OBD II sensor and used an app on my phone. But the sensor was always on and drew too much from the battery so I removed it. Hope this is helpful. Cheers, Harry On Sat, Feb 15, 2020 at 10:56 PM Kyle Stuhr <uglybones@hotmail.com> wrote: > With all the talk about displays recently, now is a good time to bring up > this question. Do any of you have a favorite OBD2 gauge? I recently did a > Bostig conversion and my stock 84 gauges suck. I have no tach and my speedo > is off by about 25%. Pegged on the 85 mph speedo is about 70 IRL. Most > Bostig guys seem to use the UltraGauge with this conversion but there are a > lot of choices out there. I assume the Subie guys use these things too. > What is your experience? > > Sent from the briny depths.
Have something to add on this topic today? Revive this thread in the forum »