I’ll have to set up for vid on the injector pulsing Test. So far I just know that gas comes out of the one tested.

Bad ecu, I’m not liking that but options narrowing.

Thanks again,

Ab

> On Mar 29, 2020, at 2:06 PM, Dennis Haynes <d23haynes57@hotmail.com> wrote:
> 
> ECU can also fail causing no spark. Are injectors pulsing while cranking? If injectors are pulsing while engine is cranking than hall sensor likely good. If pulsing but still no spark bad coil or ECU. 
> 
> Dennis
> 
> 
> -----Original Message-----
> From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf Of Alistair Bell
> Sent: Sunday, March 29, 2020 5:00 PM
> To: vanagon@GERRY.VANAGON.COM
> Subject: Engine died, Update ign
> 
> Bentley ecu harness tests continue, 24.61
> 
> Test 2, wire to coil terminal 1, good
> Test 10, wires to hall sensor connector, good
> 
> Swapped in an old coil, no change.
> 
> And reiterate , couldn’t see spark on plug when cranking ( videoed) 
> 
> I think I’ll do some machine work now , and then head back home to see if I do have spare dizzy.
> 
> Ab