if you have the Idle control valve, the one that sit on top near the
breather tower... remove it and spray a lot of carb cleanr in it and let it
sit a while...

On Wed, Apr 22, 2020 at 2:13 PM Chris S <szpejankowski@gmail.com> wrote:

> When engine is warm I’m able to adjust idle with idle adjustment screw. I
> will check the o-ring, though.
>
> Chris.
>
> Wysłane z iPhone'a
>
> > Wiadomość napisana przez alex@mevay.org w dniu 22.04.2020, o godz.
> 12:20:
> >
> > Hi Chris,
> >
> > I'm running the same setup as you.
> >
> > Sorry if this is obvious, but I didn't see you mention it.  Have you
> > checked the idle adjustment (bypass screw on throttle body)?  I recall
> > having similar symptoms when mine was set too low (screw damaged).
> >
> > Alex
>