

| Subject: | Re: leaky windshield |
| From: | Eric Caron |
| Date: | Fri, 5 Jun 2020 15:57:26 -0400 |
A picture is worth a thousand words. But, sometimes not the message or words the sender intended.
Pictures are great, but I’m thankful for verbal descriptions and info!
Eric Caron
> On Jun 5, 2020, at 3:52 PM, Bruce Todd <beeceetee@GMAIL.COM> wrote:
>
> It also shows that at one point, a (new) antennae has been installed as the
> metal where the cap would sit has been bent in the installation process.
>
> Bruce
>
> On Fri, Jun 5, 2020 at 11:28 AM Ryan Cresawn <jrcresawn@gmail.com> wrote:
>
>> Hi Eric,
>>
>> The photo on The Samba website shows that the angled cap that covers the
>> antenna is missing. With the cap removed it's clear that water could pass
>> between the hole in the nose of the Vanagon and the antenna. Where the
>> water would travel from there is a mystery to me.
>>
>> Ryan
>>
>> On Fri, Jun 5, 2020 at 11:09 AM Eric Caron <ericcaron96@comcast.net>
>> wrote:
>>
>>> Hi folks.
>>>
>>> The Samba site doesn’t play well with screen readers.
>>>
>>> What is the conclusion?
>>>
>>> Eric Caron
>>>
>>>
>>>> On Jun 5, 2020, at 1:03 PM, Dan N <dn92610@GMAIL.COM> wrote:
>>>>
>>>> I think I found the source of the leak
>>>>
>>>> https://www.thesamba.com/vw/forum/album_page.php?pic_id=2048830
>>>>
>>>> On Tue, Jun 2, 2020 at 10:39 AM <alex@mevay.org> wrote:
>>>>
>>>>> Hi Dan,
>>>>>
>>>>> I have what sounds like the same leak as you, around the clutch pedal.
>>>>>
>>>>> Along the lines of what Ben said, I thought another common cause for
>>>>> leaks is a wearing out of the sealant between body panels. I've been
>>>>> assuming mine is coming through that vertical seam running down the
>>>>> "nose" of the vanagon just inboard of the radio antenna. My sealant
>>>>> there is clearly worn out (hard/cracked/missing). Admittedly, I have
>>>>> not confirmed this source, as the van doesn't see a lot of rain, and
>>>>> I'm hoping to get a paint job in the next year or so, but it might be
>>>>> worth a look or hose spray.
>>>>>
>>>>> Good luck,
>>>>>
>>>>> Alex
>>>>>
>>>
>>Have something to add on this topic today? Revive this thread in the forum »