

| Subject: | Re: Dometic thermostat control knob |
| From: | Steven Johnson |
| Date: | Wed, 15 Jul 2020 08:49:31 -0700 |
Eric, you must not use yours at anything above 3000 feet altitude. Much higher and the air to fuel ratio when igniting the fridge with the dial all the way up would be next impossible. At high altitude you need to turn that knob all the way down so you're not introducing too much fuel to the flame. Steven 91 Westy On Tue, Jul 14, 2020, 6:35 PM Eric Caron <ericcaron96@comcast.net> wrote: > Wow! > > You found that fast. I’m glad as it is really nice having all > things in the van working well. > > And, I hope you need to turn it down often! > > Eric > > > > On Jul 14, 2020, at 9:29 PM, Douglas Toomey <drt@uoregon.edu> wrote: > > > > Thanks, Eric. I found one. Now just need to figure out how to lubricate > it > > > >> On Jul 14, 2020, at 6:21 PM, Eric Caron <ericcaron96@comcast.net> > wrote: > >> > >> Hi Douglas, > >> > >> I am surprised this broke. Mine turns so easily I wonder if it does > anything at all. And, frankly, I’m not sure how often the average person > uses it in a year but I can tell you that I set mine to as cold as possible > and never touch it again. If you actually have to turn yours down you have > the best running unit I’ve ever heard about on this list! > >> > >> If you have to have a problem with the unit you sure picked the correct > one! > >> > >> Sorry I wasn’t very helpful and hopefully someone can help you out. > Keep us posted. > >> > >> Eric Caron > >> > >> > >> > >> > >>> On Jul 14, 2020, at 7:59 PM, Douglas Toomey <drt@UOREGON.EDU> wrote: > >>> > >>> Two Dometic questions: > >>> > >>> 1) The thermostat control knob broke and I am looking for a > replacement. Any spares out there or a place to buy? > >>> 2) The thermostat itself has been getting slightly hard to turn. Any > suggestions on appropriate lubricant and how to apply without taking fridge > out? > >>> > >>> The fridge has been working great... > >> >
Have something to add on this topic today? Revive this thread in the forum »