

| Subject: | Good Glue for Rubber Piece |
| From: | Bruce Todd |
| Date: | Fri, 14 Aug 2020 08:13:25 -0700 |
I can vouch for goop. It is good stuff but can be a little messy. Bruce On Friday, August 14, 2020, Jack R <jack007@comcast.net> wrote: > Shoe goo... > You need "Automotive Goop" > https://www.walmart.com/ip/Amazing-Goop-Eclectic-160012-Auto > motive-Goop-Contact-Adhesive-and-Sealant/21129780 > > This stuff is Amazing... > It is also Amazing that they put the same stuff in different tubes to > market it to those in the: shoe business, craft, automotive, plumbing etc. > > Once they find out that Vanagon owners use this stuff, watch out for > "Vanagon Goop"! > > > > -----Original Message----- > From: Vanagon Mailing List [mailto:vanagon@gerry.vanagon.com] On Behalf > Of Jim. Felder > Sent: Friday, August 14, 2020 8:32 AM > To: vanagon@GERRY.VANAGON.COM > Subject: Re: Good Glue for Rubber Piece > > > > > Too brittle. Try shoe goo or hot glue. Use tape to mask where you don’t > want glue. > > > > Best, > > > > Jim > > > > > > > > > > > On Aug 14, 2020 at 4:06 AM, <Mark Belanger (mailto:mbelanger@gmail.com)> > wrote: > > > > > > > > Greetings all, > > > > I'm looking for recommendations for a good glue to reattach a piece of > > rubber to the front right of the driver's seat just above the track, as > > shown here: > > > > <https://ibb.co/MBTDNP7> > > > > I was thinking that a cyanoacrylate, like Loctite Ultra Gel, would be > the > > right choice but wanted to make sure I got the right stuff and avoid a > > colossal mess. > > > > > > Thanks much, > > -MB > > -- > > ________________________________________________________________________ > > > Mark Belanger - mbelanger@gmail.com > > >
Have something to add on this topic today? Revive this thread in the forum »