Careful! I got a new horn ring from one of our vendors sometime back and
discovered some very slight differences in the way it was made.
Difference so slight that I did not see it. When I put the steering wheel
assembly all back together it wouldn't really go back together. After a lot
of fiddling with it I found the plastic strip the copper ring sat on was
too thick by a fraction. I removed the copper ring and installed it on the
old plastic and everything went back together as it should.

On Sat, Aug 22, 2020 at 4:34 PM Alistair Bell <albell@shaw.ca> wrote:

> 15/16 works too. If you don’t have 24 mm
>
> Alistair
>
> > On Aug 22, 2020, at 2:12 PM, Tom Buese <tantonbz@gmail.com> wrote:
> >
> > Aha! That must be why I have a 24 mm socket!
> >
> > Sent from my iPhone
> >
> >> On Aug 22, 2020, at 5:09 PM, kenneth wilford (Van-Again) <
> kenwilfy@comcast.net> wrote:
> >>
> >> 24mm nut.
> >> We have the new horn rings if you need one.
> >>
> https://www.vanagain.com/shop/horn-contact-ring-for-back-of-steering-wheel-for-80-91-vanagon-and-eurovan-from-93-95
> >>
> >>
> >>>> On Sat, Aug 22, 2020 at 4:45 PM Mike Miller <mwmiller6@att.net>
> wrote:
> >>>
> >>> Vanalites,
> >>> need to replace my horn ring, copper wore out.
> >>>
> >>> Need to know: How big is the nut that hold the steering wheel on?
> >>> Mike not from Fresno although that might be better than Cotati just
> now,
> >>> what with all the smoke.
> >>>
> >>
> >>
> >> --
> >> Thanks,
> >> Ken Wilford
> >> John 3:16
> >> www.vanagain.com
>