

| Subject: | Re: horn ring |
| From: | Thomas Casal |
| Date: | Mon, 24 Aug 2020 15:58:55 -0400 |
Oh and is the 29.99 turn signal switch just as good as the 50$ meyle turn signal switch vendors are selling? On Mon, Aug 24, 2020 at 3:56 PM Thomas Casal <thomas.casal@gmail.com> wrote: > So I've been trouble shooting my non functioning horn. I have 12 volts at > the fuse and the horn with the key in the ignition turned to the first > position. I have no voltage without the key in the ignition. I thought the > circuit was supposed to be constantly hot but maybe not? I jumpered the > horn and it beeps so the horn works. I also grounded the positive wire on > the horn pad on the steering wheel and got a beep so that checks out. I > just changed the o ring had one and it was beat up anyway but it didn't fix > the issue. Is the turn signal switch the culprit at this point? The tab is > showing signs of wear. Thanks for any assistance. peace tom > > On Sat, Aug 22, 2020 at 6:09 PM John Rodgers <jrodgers113@gmail.com> > wrote: > >> Careful! I got a new horn ring from one of our vendors sometime back and >> discovered some very slight differences in the way it was made. >> Difference so slight that I did not see it. When I put the steering wheel >> assembly all back together it wouldn't really go back together. After a >> lot >> of fiddling with it I found the plastic strip the copper ring sat on was >> too thick by a fraction. I removed the copper ring and installed it on the >> old plastic and everything went back together as it should. >> >> On Sat, Aug 22, 2020 at 4:34 PM Alistair Bell <albell@shaw.ca> wrote: >> >> > 15/16 works too. If you don’t have 24 mm >> > >> > Alistair >> > >> > > On Aug 22, 2020, at 2:12 PM, Tom Buese <tantonbz@gmail.com> wrote: >> > > >> > > Aha! That must be why I have a 24 mm socket! >> > > >> > > Sent from my iPhone >> > > >> > >> On Aug 22, 2020, at 5:09 PM, kenneth wilford (Van-Again) < >> > kenwilfy@comcast.net> wrote: >> > >> >> > >> 24mm nut. >> > >> We have the new horn rings if you need one. >> > >> >> > >> https://www.vanagain.com/shop/horn-contact-ring-for-back-of-steering-wheel-for-80-91-vanagon-and-eurovan-from-93-95 >> > >> >> > >> >> > >>>> On Sat, Aug 22, 2020 at 4:45 PM Mike Miller <mwmiller6@att.net> >> > wrote: >> > >>> >> > >>> Vanalites, >> > >>> need to replace my horn ring, copper wore out. >> > >>> >> > >>> Need to know: How big is the nut that hold the steering wheel on? >> > >>> Mike not from Fresno although that might be better than Cotati just >> > now, >> > >>> what with all the smoke. >> > >>> >> > >> >> > >> >> > >> -- >> > >> Thanks, >> > >> Ken Wilford >> > >> John 3:16 >> > >> www.vanagain.com >> > >> >
Have something to add on this topic today? Revive this thread in the forum »