

| Subject: | Re: Sink pump improvement? |
| From: | Eric Caron |
| Date: | Tue, 27 Apr 2021 22:45:15 -0400 |
Yes, Funny thing is the more I use it the better it seems to be working. First campout this Saturday so we will see how the shakedown cruise goes. Eric Caron 85 GL Auto > On Apr 27, 2021, at 9:54 PM, Bruce Todd <beeceetee@gmail.com> wrote: > > As mentioned earlier I think the issue is likely air in your water line. Run the pump for a minute or two non stop - like your filling a big pot of water to cook spaghetti when camping...maybe even make it too! Anyway - you should hear some sputtering sounds as the air gets released and purged. See if there is any change and repeat. > > Since we are taking a poll - I prefer the Shurflo to the Delta. > > Bruce > On Tuesday, April 27, 2021, Alistair Bell <albell@shaw.ca <mailto:albell@shaw.ca>> wrote: > No, I wasn’t clear. > > It’s was my eurovan faucet that I have to pull out of the socket and lay in sink to close lid > > Alistair > > > On Apr 27, 2021, at 12:58 PM, Marc Perdue <mcperdue@gmail.com <mailto:mcperdue@gmail.com>> wrote: > > > > I installed the Shurflo faucet years ago and it's great! Alistair, I'm not > > understanding what you're saying... My Shurflo tilts up and down, so I just > > tilt it down to close the cover. > > > > It has been a while, but I'm reasonably certain there is a check valve in > > the circuit already, I think to prevent water from inside your van going > > back into the city water line when you hook that up, but don't quote me on > > that. I did have an issue where the pump was not being very efficient and > > had trouble turning on when I turned the old Delta faucet on. I could turn > > the impeller with pliers and get it moving. After working that loose and > > running it a while, I haven't had any further problem and the water comes > > out quickly. > > > > Marc Perdue > > > > On Tue, Apr 27, 2021 at 2:13 PM Alex MeVay <alex@mevay.org <mailto:alex@mevay.org>> wrote: > > > >>> People like the shurflo faucet. > >> > >> +1 > >> > >> -A > >>
Have something to add on this topic today? Revive this thread in the forum »